Custom Metal Buildings in Wisconsin,
Built to Last

Our barndominium shells run from $22,282 for a 30'x30'x13' to $80,250 for a 40'x80'x14' with two lean-tos, delivered and installed. A 30'x40'x14' is $34,855, and a 40'x60'x20' with a lean-to is $71,776. Those are shell prices. They do not include the concrete slab, site preparation, permits or interior finishing, and the interior is where a turn-key home adds most of its cost. The shell price is also quoted for your address, because the engineering is certified for your county's snow and wind loads.

Yes. Barndominiums are one of the six building types we offer, and we deliver and install them across Wisconsin and six other Midwest states. Every one is engineered and certified for the snow and wind loads of the county it is going to, which is what your permit office will ask to see. Sizes run from 30'x30' up to 40'x80' with lean-tos. The one thing worth getting right from the start is specifying it as a barndominium rather than converting a garage later, because the framing, the insulation provisions and the certified drawings are different.

Yes. Every building we sell is engineered and certified for your local snow and wind loads. For example, your building should be inspected and approved to meet your area’s snow load requirements.

Yes, you can have water seeping beneath your base rails if you do not have a sealant package applied during your building’s installation. Water seepage will occur because, while the base rail is laid flush with your foundation, it is still not completely sealed and there will be room for water to enter. However, if you have purchased our sealant package, this will be applied directly to your base rail during installation and will prevent any water from seeping into your building. During installation, a foam strip is applied to the bottom of the base rail and, once the base rail is being set, the weight of the steel will push down on the base rail and flatten the foam strip until it is completely flat against the foundation and the rail. From there, a strip of polyurethane sealant is applied on both the inside and the outside of your building!

Wisconsin Carports currently offers three different roof styles for you to choose from: Regular, A-Frame Horizontal and A-Frame Vertical. The Regular roof option is considered the “Good” option, the A-Frame Horizontal roof option is considered the “Better” option, and the A-Frame Vertical is considered the “Best” option. This is due to many different variables including maintenance and overall aesthetic.

Vertical siding is an excellent option for customers who are interested in a residential or commercial building. However, the vertical orientation is an upgraded option as it requires more material (girts) to support the metal panels.

Warranties are provided by the manufacturer of your building and vary by manufacturer. They typically include a rust-through warranty of up to 20 years, with longer coverage on 12-gauge framing. Your design consultant will confirm the exact warranties for your building before you order.

12-gauge and 14-gauge tubing are two options of square tubing available to you for your structural framework. The 14-gauge tubing is 2 ½ x 2 ½ square tubing and the standard for your framework. The 12-gauge tubing is the 2 ¼ x 2 ¼ square tubing that is available at an additional cost. While this tubing is smaller in size, it is thicker steel which offers you an extended rust-through warranty.

A steel building is a structure that is manufactured and installed with steel. These structures may have some additional non-metal material, such as wood, but are either mainly or entirely made of galvanized steel or even red iron (I-Beam). We do not offer wood or red iron buildings at Wisconsin Carports.

This is a personal preference for each customer. While some clients consider the roll-up doors to be the best option for their project, others may believe the overhead doors better meet their needs. There are many different variables that should be considered prior to choosing between these two options for your project. A few variables include color options, material, pricing, durability, and automation. Each product has its own set of pros and cons, so we recommend looking into these details.